They are VERY heavy, probably 1500 LBS and sit on top of runners, we have to pull them with a truck and they have the added bonus of being poorly designed and falling apart.
In order to get them into the orchard we had to lever them up with a 2x4 and a cinderblock and push rollers in, then replacing the rollers as we went, pull them about 100 yards, turn a corner, pull up an incline into the orchard, turn another corner and then go another 50 yards. The first 2 went relatively easily except for one unfortunate squashed hen. The third one took us getting behind it and pushing it before the pulling wire failed. We came back the next day, attached a new rope and got it in. When we started pulling the 4th one we broke the first runner, then the second, so that it for pulling it. Our neighbor with a trailer came over to help us with and it got a bit interesting. The plan was to use a winch to pull the coop onto its side on top of the trailer and then drive it over. Sounded good. Well we wound up with the coop lifted 7 feet of the ground, propped up on cinderblocks with 100 chickens underneath it enjoying the shade as the side of the coop started collapsing. We managed to drop it back down without injuring ourselves or any chickens but I learned from that, this lesson:
If something seems like a bad idea, it probably is.
We ended up converting the busted coop into a feed storage shack, and taking the coop we had been using as a feed shack and turning that back into a coop (having to move 2 tons of feed to do so).
Anyhow, the chickens are much happier in the orchard and can stay outside all day in the shade instead of sitting around panting in the sun so it all worked out.
No comments:
Post a Comment